SINGER 6105 - Manual (Page 21)

Chapter 4. Basic Zig-Zag Stitching
adjusting machine stitch to suit your fabric
You can do functional as well as decorative
zig-zag stitching with your sewing machine.
How to set selectors
PATTERN GROUP SELECTOR
Before moving selector, make sure needle is
out of the fabric.
For plain zig-zag stitching:
• Set stitch width selector on j (straight stitch)
• Turn pattern group selector to / aligning
number under mark
• Pattern Group Selector: /
• Needle Position; J» :X: «1
• Stitch Width; j jlf |
• Stitch Length:.5 - 4 to suit fabric
• General Purpose Needle Plate
• General Purpose Foot
NEEDLE POSITION SELECTOR
Before moving selector, make sure needle is
out of the fabric.
Most of your zig-zag stitching will be done in
centre JL needle position.
Left
JL
and right A settings are used for
special stitch placement, as in button sewing.
STITCH WIDTH SELECTOR
Before moving selector, make sure needle is
out of the fabric.
To produce a plain zig-zag or a decorative
stitch, the stitch width selector is moved from
its straight stitch position | to any of its
other five positions. The further you move the
selector lever toward the right, the wider your
stitch will be.
< -
▼ 3
'>
J
mmmmmmJ________________
Pattern Group Selector
Needle Position Seiector
4
4
Stitch Width Seiector