Maintenance and acmustments, Maintenance and storage, Recommended maintenance intervals – Troy-Bilt 1900678 User Manual

Page 23

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SECTION 5

Maintenance and AcMustments

S

CAUTION; To avoid personal injury stop

the engine, disconnect the spark plug wire,

keep the wire away from the soark plug, and let

tne engine ana muffler cool down before inspect­

ing O’’ servicing the mower or engine.

RECOMMENDED MAINTENANCE INTERVALS

Maintenance
Procedure:

Every

Use

Every 10

Operating

Hours

As

Noted

Check blade for tightness

•

Inspect nuts & bolts for tightness

•

Inspect operator controls

•

Clean underside of mower and inside of
discharge chute

•

Inspect blade for sharpness

•

Inspect electric start wires and cables

•

Inspect electrolyte level in battery

•

Recharge battery

Before and after prolonged storage

Lubricate traction drive chain, linkages,
pivot points, throttle control cable, and

wheel mounting bolts and studs

•

Check tension on wheel drive belt and
chain

•

Check tension on blade drive belt

•

Check tire pressure

•

Or once a week, whichever is sooner.

Perform the Blade Brake Control

3-second Stop Test described on

Page 34

•

At the start of each season and after
every 10 operating hours.

Sharpen or replace blade

Whenever damaged, out of
balance, or dull

ENGINE

Inspect engine crankcase oil level

•

And after every 5 hours of continuous
operation

Inspect throttle cable

•

Clean air filter

At least every 25 operating hours —
see engine owner’s pamphlet.

Change engine crankcase oil I

After 5 break-in operating hours
and every 25 hours thereafter

Adjust carburetor

As required — see engine
owner’s pamphlet

Cooling system maintenance

See engine owner’s pamphlet

Clean engine !

See engine owner’s pamphlet

Clean and reset spark plug

See engine owner’s pamphlet

21

Advertising