Campbell Hausfeld CHN70500 - Manual (Page 3)

Operating Instructions and Parts Manual
Straight Finish Nailer
www.chpower.com 3
Description
This nailer is designed for decorative trim, molding, window and door casings,
furniture trim, door jamb installation, and picture frame assembly. Features include:
convenient rear loading magazine which holds up to 110 nails, tethered no-mar tip
with stud finder function, quick clear nose, an adjustable depth of drive mechanism,
oil free, electronic low nail indicator, nail placement laser pointer, in-line magazine,
bubble level, anti-dry fire, conversion trigger with safety lockout, rubber comfort grip,
swivel plug, and adjustable exhaust.
Figure 1 - CHN70500 Angle Finish Nailer
Specifications
Model CHN70500
Requires: 0.7 Avg SCFM using 10
fasteners per minute at 90 psi
Air Inlet: 1/4 inch NPT
Fastener Size Range:
1 inch to 2-1/2 inch 16g
brad finish nails
Magazine Capacity:
110 fasteners per load
Weight: 5 lbs., 5 oz.
Length: 13 inches
Height: 12 inches
Maximum Pressure:
120 psi
Pressure Range:
70 psi to 120 psi
Batteries: Two (2) AAA
Laser: Class IIIA
Wavelength:
640 nm - 660 nm
Radiant Power:
1.53 < 5 mW
Locate model number and date code on
magazine and / or tool body. Record below:
Model #: _____________________________
Date Code: ___________________________
Retain these numbers for future reference.