MTD 213-381A - Manual (Page 15)

Model 381
•N
PARTS LIST FOR MODEL 381 TILLER
TEF.
NO.
PART
NO.
COLOR
CODE DESCRIPTION
NEW
PART
REF.
NO.
PART
NO.
COLOR
CODE
DESCRIPTION
NEW
PART
1 710-0160 Hex Wash Hd. AB Tap Scr. 27 712-0267 Hex Nut 5/16-18 Thd.*
#8 X .62" Lg. 28 736-0119 L-Wash. 5/16" I.D.*
2 15278 —463 Handle Panel Ass’y. 29 736-0921 L-Wash. 1/2 " I.D.*
3 720-0180 Handle Grip 30 712-0200 Hex Inst. L-Nut
1
/
2
-
2
O Thd.
4 731-0108 Throttle Control Knob 31 06813 —463 Wheel Bracket Ass’y.
5 714-0149 Internal Cotter Pin 32 06792 Engine “U”-Channel
6 04602 “U”-Clevis Pin .500" Dia. Ass’y.—L.H.
7 710-0451 Carriage Bolt 5/16-18 x .75" 33 712-0267 Hex Nut 5/16-18 Thd.*
Lg.* 34 710-0322 Hex Sems Bolt 5/16-18 x
8 04586 “U”-Channel Plate 1.00" Lg.*
9 711-0231 Clevis Pin .500" Dia. 35 06794 Engine “U”-Channel
10 04668 -463 Depth Bar Ass’y.—R.H.
11 732-0194 Spring Pin 36 749-0356 Handle—R.H.
12 732-0290 Depth Bar Spring 37 711-0599 Clevis Pin
13 736-0119 L-Wash. 5/16" I.D.* 38 736-0119 L-Wash. 5/16" I.D.*
14 714-0145 Internal Cotter Pin 39 712-0267 Hex Nut 5/16-18 Thd.*
15 736-0119 L-Wash. 5/16" I.D.* 40 06816 “U”-Channel Bracket Ass’y.
16 712-0267 Hex Nut 5/16-18 Thd.* 41 712-0267 Hex Nut 5/16-18 Thd.*
17 749-0502 Handle—L.H. 42 04589 Tailpiece Ass’y.
18 710-0253 Hex Bolt 3/8-16 X 1.00" Lg.* 43 747-0183 Control Rod
19 736-0105 Belleville Wash. 3/8" I.D. 44 747-0182 Clutch Lever
20 710-0118 Hex Bolt 5/16-18 X .75" Lg.* 45 720-0143 Grip
21 736-0169 L-Wash. 3/8" I.D.* 46 746-0369 Throttle Control Ass’y.
22 712-0798 Hex Nut 3/8-16 Thd.* Comp.
23 736-0253 Belleville Wash. .505 I.D. x 47 735-0126 Rubber Wash.
1.00" O.D. 48 736-0159 FI-Wash. .344" I.D. x
Jv24 710-0458 Carriage Bolt 5/16-18 x 1.75" .880 O.D. X .06
Lg.* 49 712-0158 Hex Cent. L-Nut 5/16-18 Thd.
25 734-0968 Wheel Ass’y. 9 x 1.75 50 732-0191 Extension Spring .75" O.D.
26 738-0318 Shoulder Bolt .625" Dia. x X 11.0" Lg.
2.75" Lg.
'For taster service obtain standard nuts, bolts, and washers locally. If these Items cannot be obtained
locally, order by part number and size as shown on parts list,
(463—Top Flite Red) When ordering parts if color or finish is important, use the appropriate color
(447—Patina Silver) code shown at left. (e.g. Top Flite Red Finish—15278 (463).)
The engine is not under warranty by the tiller manufacturer. If repairs or service is needed on the
engine, please contact your nearest authorized engine service outlet. Check the “Yellow Pages” of
your telephone book under “Engines—Gasoline.” Find It Fast
In The
Yellow Pages
NOTE
This instruction manual covers various models
and all specifications shown do not necessari­
ly apply to your model. Specifications subject
to change without notice or obligation.
15