Safe operation practices for tillers – MTD 213-381A User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

t

WARNING

I

To reduce the potential for any injury, comply with the foliowing safety instructions. Faiiure to comply with
the instructions may result in personai injury.

SAFE OPERATION PRACTICES FOR TILLERS

1. It is suggested that this manual be read in its

entirety before attempting to assembie or
operate this unit. Keep this manuai in a safe
piace for future reference and for ordering
repiacement parts.

2. Your tilier is a precision piece of power equip­

ment, not a plaything. Therefore, exercise ex­
treme caution at ail times.

3.

Read this Owner’s Manual carefully. Be

thoroughly familiar with the controis and the
proper use of the equipment.

14. Check the fuel before starting the engine.

Gasoline is an extremely flammable fuel. Do

not fill gasoline tank indoors, when the engine

is running, or whiie the engine is still hot.

Wipe off any spilied gasoiine before starting

the engine as it may cause a fire or explosion.

15. Do not run the engine while indoors. Exhaust

gases are deadly poisonous.

16. Be careful not to touch the muffler after the

engine has been running. It is hot.

4. Never allow children to operate a power tiller.

Only persons well acquainted with these rules

N of safe operation should be allowed to use

your tiller.

5. Keep the area of operation clear of ail per­

sons, particularly small children and pets.

6. Do not operate equipment when barefoot or

wearing open sandals. Always wear substan­
tial footwear.

7. Do not wear loose fitting clothing that could

get caught on the tiller.

8. Do not start the engine unless the shift lever

is in the neutral (N) position.

9. Do not stand in front of the tiller while starting

the engine.

10. Do not place, feet and hands on or near the

tines when starting the engine or while the
engine is running.

11. Never attempt to make a wheel or depth bar

adjustment while the engine is running.

17. Do not change the engine governor settings

or overspeed the engine. Excessive engine
speeds are dangerous.

18. Before any maintenance work is performed or

adjustments are made, remove the spark plug
wire and ground it on the engine block for
added safety.

19. Use caution when tilling near buildings and

fences. Rotating tines can cause damage or
injury.

20. Before attempting to remove rocks, bricks and

other objects from tines, stop the engine and
be sure the tines have stopped completely.
Disconnect the spark plug wire and ground to
prevent accidental starting.

21. Check the tine and engine mounting bolts at

frequent intervals for proper tightness.

22. Keep all nuts, bolts and screws tight to be

sure the equipment is in safe working condi­
tion.

12. Do not leave the tiller unattended with the

engine running.

13. Do not walk in front of the tiller while the

engine is running.

23. Never store the equipment with gasoline in

the tank inside of a building where fumes may

reach an open flame or spark. Allow the

engine

to

cool

before

storing

in

any

enclosure.

Advertising