Maintenance and troubleshooting, Battery replacement, How to level the elliptical crosstrainer – NordicTrack CX 920 831.28353 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

HOW TO USE THE INFORMATION MODE

THE OPTIONAL CHEST PULSE SENSOR

The console features an information mode that shows
the total time that the elliptical crosstrainer has been
used, the total distance that the pedals have moved,
and whether the console is set to display speed and
distance in miles or kilometers.

To select the information mode, hold down the Select

Program button for a few seconds. An E (for English
miles) or an M (for metric kilometers) will appear in the

display, (To change the unit of measurement, press the
+ button.) Press the Display Mode button. The display
will then show the number of hours that the elliptical
exerciser has been used. Press the Display Mode but­
ton again. The display will then show the distance that
the pedals have moved.

To exit the information mode, press the Select Program
button again.

The optional chest pulse sensor provides hands-free
operation and continuously monitors your heart rate
during your workouts. To purchase the optional
chest pulse sensor, call toll-free 1-800-734-2377.

MAINTENANCE AND TROUBLESHOOTING

Inspect and properly tighten all parts of the elliptical
crosstrainer regularly. Replace any worn parts immedi­

ately.

For smooth

operation of
the elliptical
crosstrainer,
the incline
frame should
be kept clean.

Using a soft

cloth and mild
detergent,
clean dust and
other residue
from the incline
frame where the incline wheels make contact with it.
Other parts of the elliptical crosstrainer can also be
cleaned in this way. Never use abrasives or sol­
vents.

To prevent damage to the console, keep liquids away
from the console. Always remove the batteries from
the console when storing the elliptical crosstrainer.

BATTERY REPLACEMENT

If the letters LO appear in the console display, the
batteries should be checked. Refer to assembly step 4

on page 7 to find the location of the battery compart­
ment. Remove one of the batteries and then re-insert it.

If the letters LO continue to appear in the display,
replace the batteries.

HOW TO LEVEL THE ELLIPTICAL CROSSTRAINER

If the elliptical

crosstrainer rocks
slightly during
use, turn one or
both of the level­
ing feet under
the rear stabilizer
until the the rock­
ing motion is
eliminated.

20

Advertising