Insert the key into the console, Select one of the preset programs, N-nn – NordicTrack C2255 NTL07806.2 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

HOW TO USE A PRESET PROGRAM

Insert the key into the console.

See HOW TO TURN ON THE POWER on page

11

.

Select one of the preset programs.

El

To select one of the six
preset programs, press
the Program Select but­
ton repeatedly until “P 1,”
“P 2,” “P 3," “P 4,” “P 5,”
or “P 6” appears In the
Calories/Pulse display.

As each preset program is selected, the maximum
speed setting of the program and the maximum
Incline setting of the program will flash in the dis­
plays for a few seconds. The Time/Distance dis­
play will show
how long the
program will last.
A profile of the
speed settings of
the program will
scroll across the

matrix.

Press the Start button or the 1 Step Speed in­

crease button to start the program.

A moment after the button is pressed, the tread­

mill will automatically adjust to the first speed and
incline settings for the program. Hold the handrails

and begin walking.

Each program is divided into 30. 50, or 60 one-
minute segments. One speed setting and one in­

cline setting are programmed tor each segment.

Note: The same speed setting and/or incline setting
may be programmed for two or more consecutive

segments.

3

n-nn

o

U‘UU r

i

f

ruci.

The speed set­
ting for the first
segment will be
shown in the
flashing Current

Segment column

of the matrix.

(The incline settings are not shown in the matrix.)

The speed settings for the following segments will
be shown in the columns to the right.

When only three seconds remain in the first seg­

ment of the program, both the Current Segment

column and the column to the right will flash and a
series of tones will sound. If the speed and/or the

incline of the treadmill is about to change, the

speed setting and/or the incline setting will flash in
the displays to alert you.

When the first segment is completed, all speed

settings will move one column to the left. The

speed setting for the second segment will then be
shown in the flashing Current Segment column
and the treadmill wiii automatically adjust to the
speed and incline settings for the second seg­

ment. Note: If ail seven indicators in the Current
Segment column are lit, the speed settings may
move downwardso that only the highest indicators
appear in the matrix.

The program will continue in this way until the

speed setting for the last segment is shown in the
Current Segment column and the last segment
ends. The walking belt will then slow to a stop.

If the speed or incline setting for the current
segment is too high or too low, you can manually
override the setting by pressing the Speed or
Incline buttons. Every few times a Speed button is
pressed, an additional indicator will light or darken
in the Current Segment column; If any of the
columns to the right of the Current Segment col­
umn have the same number of lit indicators as the
Current Segment column, an additionai indicator
may light or darken in those columns as well.

Important: When the current segment of the
program ends, the treadmill will automatically
adjust to the speed and incline settings for the
next segment.

To stop the program at any time, press the Stop

button. The time will begin to flash in the

Time/Distance display. To restart the program,

press the Start button or the 1 Step Speed in­
crease button. The walking belt will begin to move
at 1 mph. When the next segment of the program
begins, the treadmill will automatically adjust to the
speed and incline settings for the next segment.

14

Advertising