Assembly instructions – Ryobi 310BVr User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ASSEMBLY INSTRUCTIONS
INSTALLING THE ADAPTER ONTO THE UPPER
VACUUM TUBE (MODEL 310BVr ONLY)
A
WARNING:
Do not install while unit is
running to avoid serious personal injury.
1. Turn the blower upside down (Fig. 4). Hold the blower
between your knees to install the adapter and
vacuum tubes.
2. Locate the hole in the door. The door lock tab is
recessed in the hole (Fig. 5). Press the door lock tab
toward the front of the unit (away from the handle) to
release the lock and open the door (Fig. 6).
3. Align the adapter's three (3) slots with the unit's three
(3) hooks (Fig. 6). Push firmly so all three (3) hooks
snap through (Fig. 7).
4. Align the arrow on the upper vacuum tube with the
arrow on the adapter. Slide the upper vacuum tube
onto the adapter (Fig. 8).
NOTE: The arrows must align properly to install the
vacuum tubes correctly.
Hooks (3)
Fig. 6
Fig. 7
Fig. 5
Fig. 8