Installation windshield mount, Power connection, Mounting location – Escort 9500ix User Manual

Page 5: Windshield mount

Advertising
background image

6

7

Installation

Windshield Mount

Facing Down

Facing Up

Level mounting

Power Connection

To power PASSPORT, plug the small end of

the SmartCord, (telephone-type
connector) into the modular jack on
PASSPORT’s left side, and plug the lighter
plug adapter into your vehicle’s lighter
socket or accessory socket.

PASSPORT operates on 12 volts DC

negative ground only. The lighter plug
provided is a standard size and will work
in most vehicles. However, some vehicles
may require our optional sleeve to ensure
a snug fit. If so, simply call or visit our

website.

NOTE: depending on your vehicle,

the lighter socket power may either be

continuously on, or it may be switched

on and off with your ignition switch.

Optional power cords

Call or visit our website for our optional

Direct-wire SmartCord.

Mounting Location

WARNING: ESCORT cannot

anticipate the many ways PASSPORT

can be mounted. It is important that

you mount PASSPORT where it will not

impair your view nor present a

hazard in case of an accident.

2 To adjust PASSPORT on your wind-

shield, use the EasyMount adjustment
button located on the top of the
PASSPORT, and slide PASSPORT forward
or backward to obtain a level position.





When installed and adjusted properly,

the back top edge of PASSPORT should
rest solidly against your windshield.

User’s Tip
You can leave the EasyMount bracket in

place on your windshield, and easily
remove PASSPORT by pressing the adjust-
ment button and sliding PASSPORT off the
mount. Again, be sure to position the
bracket where it won’t present a hazard in
the event of an accident. Additional
mounts are available.

Where to mount PASSPORT

For optimum detection performance, we
recommend the following:

• Using the supplied windshield mount,

position your PASSPORT level and high
enough on your front windshield to
provide a clear view of the road ahead.
For optimum rear detection, center the
detector between the driver and
passenger.

• Mount PASSPORT away from windshield

wipers, other solid objects, and heavily

tinted areas that might obstruct the radar
antenna or laser lens.

NOTE: In order for PASSPORT’s

GPS-powered features to work

properly, the top case must have a

clear view of the sky.

Windshield Mount

PASSPORT’s EasyMount windshield
bracket is designed for unobtrusive and
hassle-free mounting.

1 Depress the adjustment button on the

top of PASSPORT (by the word ESCORT)
and slide the EasyMount bracket into the
slot until it is locked into the position

which best fits the angle of your wind-

shield (there are four settings available).
For extremely horizontal or extremely
sloped windshields, the EasyMount
bracket can be bent. However, we suggest
that you do not do this when the bracket is
connected to the detector.

To ensure that the suction cups

adhere to the windshield firmly, be sure to
keep both your windshield and the
suction cups clean.

Advertising