Akai MPC 1000 - Manual (Page 104)

MPC1000 V2 Operator’s Manual rev 1.0
94 Chapter 15: Save / Load
Loading a sample
You can load a sample file one by one. You can also
assign the sample to the pad.
01. Select a sample file and load it. The Load a Sample
window will be displayed.
You can listen to the sample by pressing the [F2]
(PLAY) key.
To cancel the loaded sample, press the [F4]
(DSCARD) key.
02. Select the pad to assign the selected sample by hitting it.
When you hit the pad, the pad number will be dis-
played in the Assign to pad field.
If you do not wish to assign the sample to any pad,
select OFF by turning the DATA wheel to the left.
03. Press the [F5] (KEEP) key.
The loaded sample will be assigned to the selected pad.
Tips : You can load the “.snd” files. This includes files from
MPC3000/2000/2000XL.
Loading a program
You can load a program file one by one.
01. Select a program file and load it. The Load a Pro-
gram window will be displayed.
To cancel the operation, press the [F4] (CANCEL) key.
02. In the Load field, select if you wish to load the
samples as well.
WITH SAMPLES
The MPC1000 will load the samples used
for the program as well. Normally select
this option.
PROGRAM ONLY
The MPC1000 will load only the program
file. It does not load the samples. Select this
option when you wish to create a new pro-
gram by assigning different samples to the
saved program.
03. If you selected WITH SAMPLES in the Load field,
make settings in the Replace same samples in
memory field.
You can set how to handle the file when you al-
ready have the data with the same name as the load-
ing file in the unit.
NO The MPC1000 will not load the sample with
the same name.
YES The MPC1000 will overwrite the data by
the new data.
04. Press the [F5] (DO IT) key.
The MPC1000 will start loading the data.
• Deleting the data in the memory before loading
When you press the [F2] (CLEAR) key instead of
the [F5] (DO IT) key in step 4., you can clear the
MPC1000’s memory and load only the selected pro-
gram in the memory.
01. In the step 4, press the [F2] (CLEAR) key instead of
the [F5] (DO IT) key.
The CAUTION window will be displayed. If you press
the [F5] (DO IT) key, the MPC1000 will start loading
the program after it clears all its internal memory.
Note : If you do this operation, all the data saved in the unit will
be deleted.