NETGEAR wndr3700 User Manual

Page 140

Advertising
background image

RangeMax™ Dual Band Wireless-N Gigabit Router WNDR3700 User Manual

Default Configuration and Technical Specifications

A-1

v1.3, October 2009

Appendix A

Default Configuration and

Technical Specifications

This appendix provides factory default settings and technical specifications for the RangeMax
Dual Band Wireless-N Gigabit Router WNDR3700.

Restoring the Default Factory Configuration Settings

You can restore the factory default configuration settings to reset the router’s user name to admin,
the password to password, and the IP address to www.routerlogin.net. This procedure erases
your current configuration, including your wireless security settings, and restores the factory
defaults. When you log in after resetting, the Smart Wizard configuration assistant prompts you to
configure these settings.

To restore the factory default configuration settings:

1. Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings

button, located on the bottom of the router, for over 5 seconds until the Power light turns to
blinking amber.

2. Release the restore factory settings button, and wait for the router to reboot.

The factory default settings are restored so that you can access the router from your Web
browser using the factory defaults.

Table A-1. WNDR3700 Router Default Configuration Settings

Feature

Default Setting

Router login

Router login URL

http://www.routerlogin.net or
http://www.routerlogin.com

User name (case-sensitive) printed on
product label

admin

Password (case-sensitive) printed on
product label

password

Advertising
This manual is related to the following products: