NETGEAR wndr3700 User Manual

Page 33

Advertising
background image

RangeMax™ Dual Band Wireless-N Gigabit Router WNDR3700 User Manual

Safeguarding Your Network

2-11

v1.3, October 2009

Passphrase. To use a passphrase to generate the keys, enter a passphrase, and click
Generate. This automatically creates the keys. Wireless stations must use the passphrase
or keys to access the wireless router.

Key 1 – Key 4. These values are not case-sensitive. You can manually enter the four data
encryption keys. These values must be identical on all computers and access points in your
network. Enter 10 hexadecimal digits (any combination of 0–9, a–f, or A–F).

7. Select which of the four keys will be the default.

Data transmissions are always encrypted using the default key. The other keys can be used
only to decrypt received data. The four entries are disabled if WPA-PSK or WPA
authentication is selected.

8. Specify the wireless setting for the 5 GHz wireless network the same as you did for the 2.4

GHz wireless network.

9. Click Apply to save your settings.

Configuring WPA, WPA2, or WPA/WPA2 Wireless Security

To set up wireless security, you can either manually configure it in the Wireless Settings screen, or
you can use Wi-Fi Protected Setup (WPS) to automatically set the SSID and implement WPA/
WPA2 security (see

“Using Push 'N' Connect (WPS) to Configure Your Wireless Network” on

page 2-13

.

Both WPA and WPA2 provide strong data security. WPA with TKIP is a software implementation
that can be used on Windows systems with Service Pack 2 or later. NETGEAR recommends using
WPA2 with AES, which provides the strongest security. WPA2 with AES is a hardware
implementation; see your device documentation before implementing it. Consult the product
documentation for your wireless adapter for instructions for configuring WPA settings.

Note: Not all wireless adapters support passphrase key generation.

Note: If you use a wireless computer to configure wireless security settings, you will be

disconnected when you click Apply. If this happens, reconfigure your wireless
computer to match the new settings, or access the wireless router from a wired
computer to make further changes.

Advertising
This manual is related to the following products: