Using the setup wizard, Viewing or manually configuring your isp settings, Using the setup wizard -6 – NETGEAR wndr3700 User Manual

Page 19

Advertising
background image

RangeMax™ Dual Band Wireless-N Gigabit Router WNDR3700 User Manual

Configuring Your Internet Connection

1-6

v1.3, October 2009

The language you select is then downloaded and displayed in the language selection box, and
your screen display will be in the selected language.

Using the Setup Wizard

You can manually configure your Internet connection using the Basic Settings screen, or you can
allow the Smart Setup Wizard to detect your Internet connection. The Smart Setup Wizard
searches your Internet connection for servers and protocols to determine your ISP configuration.

This feature is not the same as the Smart Wizard on the Resource CD that is used for installation.
To use the Smart Setup Wizard to assist with configuration or to verify the Internet connection
settings, follow this procedure:

1. From the top of the main menu, select Setup Wizard.

2. Select Yes for the Auto-Detect Connection Type, and then click Next to proceed.

3. Enter your ISP settings, as needed.

4. At the end of the Setup Wizard, click Test to verify your Internet connection. If you have

trouble connecting to the Internet, see

Chapter 8, “Troubleshooting

.”

Viewing or Manually Configuring Your ISP Settings

To view or configure the basic settings:

1. Log in to the wireless router as described in

“Logging In to Your Wireless Router” on

page 1-2

.

2. On the Basic Settings screen, select Yes or No depending on whether your ISP requires a

login. This selection changes the fields available on the Basic Settings screen.

Yes. If your ISP requires a login, select the encapsulation method. Enter the login name. If
you want to change the login time-out, enter a new value in minutes.

No. If your ISP does not require a login, enter the account name, if required, and the
domain name, if required.

Note: If you are not connected to the Internet and select a language that is not stored

in flash memory, your selection may fail. If you see a “download fails”
message after your language selection, make sure you are connected to the
Internet and make your selection again.

Advertising
This manual is related to the following products: