P.166, Changing the built-in flash discharge method – Pentax K-X User Manual

Page 168

Advertising
background image

166

U

sin

g

th
e F
lash

5

Set the camera to wireless flash mode when using an external flash in
combination with the built-in flash.

1

Press the four-way controller (3).

The [Flash Mode] screen appears.

2

Select r and press the 4
button.

The camera is ready to take a picture.

Using the Built-in Flash in Wireless Mode

When the drive mode is set to i (Remote Control (3s delay)) or the lens
aperture is not set to the s position, r cannot be selected.

Flash Mode

Wireless Mode

Cancel

OK

OK

MENU

0.0

Changing the Built-in Flash Discharge Method

You can change the built-in flash discharge method used in wireless
mode.
Set in [17. Flash in Wireless Mode] of the [A Custom Setting 3] menu
(p.82).

1

On

Discharges the built-in flash as a master. (default setting)

2

Off

Discharges the built-in flash as a control flash.

HSb (High-speed flash sync) is not available with the built-in flash.

Advertising