Pentax K-X - Manual (Page 299)

297
Ap
pe
n
d
ix
11
The USB
connection
with a
computer
does not
work
properly
The USB connection
mode is set to [PTP] Set [USB Connection] in the [R Set-up 2]
menu to [MSC]. (p.265)
Shake
Reduction
does not
work
The Shake
Reduction function
is off
Set [Shake Reduction] to on. (p.129)
The Shake
Reduction function
is not set properly
If a lens for which the focal length
information cannot be obtained is used, set
the focal length in the [Input Focal Length]
screen. (p.130)
Shutter speed is too
low for the Shake
Reduction function
to be effective when
panning or shooting
night scenes, etc.
Set [Shake Reduction] to off and use a
tripod.
The subject is too
close Move away from the subject, or turn off the
Shake Reduction function and use a tripod.
Problem Cause Remedy