Bolens 130-360A User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
■1. Place steering shaft (F) pinion in steering gear
and fasten with two hex sems bolts (L). A V
2
"
wrench is required. See figure 4.
FIGURE 4.
■2. Place one tube clamp (G) under steering
frame. See figure 5.
■
3
. Place the other tube clamp (G) on top of steer
ing shaft and secure with four hex screws (M)
and hex lock nuts (N). Two 7/16" wrenches are
required. See figure 6.
FIGURE 6.
Advertising