Bolens 130-360A User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
' 1
■ ■
V.
^
>4*
i
Tiuss Scrpw Truss Screw
(B)
(A)
‘ I \
■ ■«; lb-
4. Assemble the hood with 5/8" truss screws (A)
to the rear of hood, and the
V z "
long truss
—screws (B) to the front of hood. Fasten with
lock washers (D) and hex nuts (C) to the in
side. See figure 7.
FIGURE 7.
Vi* ' >■
.* »■
5. Place wave washer (K), steering wheel (E),
— belleville washer (J), over end of steering shaft
and secure with hex nut (I), using a
V z "
wrench. See figures 8 and 9.
FIGURE 8.
Hex Nut (I)
Belleville
-w* Washer iJ>
Steering
Wheel (E)
NOTE
It may be necessary to reach inside
the hood and push up on steering
shaft to get the steering wheel on.
6. Place steering wheel cap (H) in position and
press by hand.
FIGURE 9.