System : memory : recall <numeric, 6 system subsystem – Anritsu MP1777A User Manual
Page 102
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8.3 Device-Specific Commands
8.3.6 SYSTem Subsystem
The SYSTem subsystem performs control (setting and display) of memory, buzzer and other items.
SYSTem
MEMory
DATE -
DATE?
TIME -
RECall
STORe
CLEar
LABel
LABel?
TIME?
BUZZer —
BUZZer?
ERRor?
VERSion?
<numeric>
<numeric>
<numeric>
<numeric>, <title>
<numeric>
<numeric 1>, <numeric 2>,
<numeric 3>
<numeric 1>, <numeric 2>,
^numeric 3>
<boolean>
: SYSTem : MEMory : RECall <numeric>
Command type
Parameter
Function
Restriction
Example of use
Sequential command
<numeric> = <DECIMAL NUMERIC PROGRAM DATA>
0 to 10 .......... Memory number 0 to Memory number 10
Calls the set data from memory.
Specifying a memory number where no data is written will result in a run time error.
Calls data from memory number 1.
> ; SYSTem : MEMory : RECall 1
:
SYSTem : MEMory ; : STORe <numeric>
Command type
Sequential command
Parameter
<numeric> = <DECIMAL NUMERIC PROGRAM DATA>
1 to 10...........Memory number 0 to Memory number 10
Function
Writes set data into memory.
Example of use
Writes data into memory number 3.
> ; SYSTem : MEMory : STORe 3
8-25
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE |