Cleaning the intake filter, Maintenance – Astro Pneumatic 29 Gallon Belt Driven Air Compressor 68127 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
MAINTENANCE
CLEANING THE INTAKE FILTER
See Figure 19.
The intake filter prevents dust and dirt being drawn in.
It is essential to clean this filter after at least every 100
hours in service. A clogged intake filter will decrease the
compressor’s performance dramatically. Undo the two
allen screws. You can then remove the filter from the two
halves of the plastic housing, tap it to remove the dirt, blast
it down with low-pressure compressed air (approx. 3 bar)
and re-insert it.
18
Advertising