Bolens 132-698A User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
2. Push down and turn the locks on the transmis-
— Sion cover one-quarter turn. See figure 7.
FIGURE 7.
3. Lift the transmission cover. Unplug the green
safety wire from beneath the transmission
—cover. See figure 8. Remove transmission
cover.
FIGURE 8.
4. Install the four foam strips (H) into the battery
box as follows.
A. Using a cloth, clean the Inside of the bat
tery box with a thinner or solvent.
B. Peel the paper off the foam strips to ex
pose the adhesive backing. Press foam
strips firmly into the corners of the battery
--------- box. See figure 9.
FIGURE 9.
Advertising