Transmission belts removal, Figure 31. deck links, Note – Bolens 137-465A User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FIGURE 27. REMOVING MOWER BELT
Step 4. Place the lift lever in the engaged
position. See figure 9.
Step 5. Unhook the tension springs on both
sides of the deck. See figure 30.
FIGURE 30. REMOVING TENSION SPRINGS
Step 6. Remove the front four deck iinks from the
cutting deck. See figure31.
Step 7. Remove the belt guards from both deck
pulleys. See figure 31.
Step 8. Remove and replace the belt and
reassemble.
TRANSMISSION BELTS REMOVAL
Step 1. Place the lift iever in the disengaged
position. See figure 9.
Step 2. Remove the belt keeper and large bolt on
engine puliey. See figure 28.
Step 3. Unhook the belt from the engine pulley.
See figure 29.
Step 4. Place the lift lever in the engaged
position. See figure 9.
■f
K '
Decfc_ ................
Links'
Dpck Belt
-
«• -
»
FIGURE 31. DECK LINKS
Step 5. Unhook the tension springs on both
sides of the deck. See figure 30.
Step 6. Remove the front four deck links from the
cutting deck. See figure 31.
Step 7. Tip the deck down as shown in figure 31.
NOTE
Leave the belt attached to the deck
pulleys unless you want to replace
it.
Engine Belt Guard
Mounting Holes____ - ^
^ I
FIGURE 32. BELT GUARD REMOVAL
14