Bolens 112-413R352 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2.
Slide the ends of the front frame assembly into
“ the ends of the rear frame as shown in figure 9A.
3.
Secure front of bag to front frame by slipping
plastic channels on sides and bottom of bag over
frame. See figure 9B.
Attach the hardtop cover to the grass catcher as
follows. See figure 10.
a.
Place the cover in position on top of the grass
catcher. Press the rear frame into the channel
on the rear of the cover (beneath the rear han
dle).
b.
Slide the notches on the sides of the cover
over the front catcher frame.
c.
Attach rear of cover to frame using the flat
washer and one self-tapping screw as shown
in figure 10. Attach the sides of the cover to
frame with the other two self-tapping screws.
FIGURE 10.
5. Assemble the locking lever as follows;
a.
Place wave washer on shoulder bolt (crowned
side of washer goes against the head of bolt).
b. Insert shoulder bolt up through hole in hardtop
-------- cover-as shown in figure 11. Place “star”
washer over shoulder bolt.
c.
Thread shoulder bolt into the grass catcher
locking lever, using a 9/16" socket wrench. Do
not overtighten. Locking lever must be able to
pivot.