Precautions to take when sanding paint – Black & Decker 6112 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

3. Thread wire cup brush onto spindle and tighten.

4. Always wear eye protection and appropriate protective clothing.

Precautions To Take When Sanding Paint

1. Sanding of lead based paint is NOT RECOMMENDED due to the difficulty

of controlling the contaminated dust. The greatest danger of lead poison­

ing is to children and pregnant women.

2. Since it is difficult to identify whether or not a paint contains lead without

a chemical analysis, we recommend the following precautions when sand­

ing any paint:

PERSONAL SAFETY

a. No children or pregnant women should enter the work area where the

paint sanding is being done until all clean up is completed.

b. A dust mask or respirator should be worn by all persons entering the work

area. The filter should be replaced daily or whenever the wearer has diffi­

culty breathing.

NOTE:

Only those dust masks suitable for working with lead paint dust

and fumes should be used. Ordinary painting masks do not offer this pro­

tection. See your local hardware dealer for the proper N.I.O.S.H. approved

mask.

c. NO EATING, DRINKING or SMOKING should be done in the work area to

prevent ingesting contaminated paint particles. Workers should wash and

clean up BEFORE eating, drinking or smoking. Articles of food, drink, or

smoking should not be left in the work area where dust would settle on

them.

ENVIRONMENTAL SAFETY

a. Paint should be removed in such a manner as to minimize the amount of

dust generated.

b. Areas where paint removal is occurring should be sealed with plastic

sheeting of 4 mils thickness.

c. Sanding should be done in a manner to reduce tracking of paint dust out­

side the work area.

CLEANING AND DISPOSAL

a. All surfaces in the work area should be vacuumed and thoroughly cleaned

daily for the duration of the sanding project. Vacuum filter bags should be

changed frequently.

b. Plastic drop cloths should be gathered up and disposed of along with any

dust chips or other removal debris. They should be placed in sealed refuse

receptacles and disposed of through regular trash pick-up procedures.

During clean up, children and pregnant women should be kept away from

the immediate work area.

c.

All toys, washable furniture and utensils used by children should be

washed thoroughly before being used again.

Advertising
This manual is related to the following products: