Canon A20 - Manual (Page 49)

47
• If the LCD monitor is on, you can check
the results of the compensation by
viewing the image on the LCD monitor.
• A shot can be taken immediately after.
The menu will reappear after the shot,
allowing you to adjust the setting.
4
Press the SET button.
5
Take the shot.
If you wish to turn compensation off,
repeat this procedure and set the
compensation value to [0].
• The camera retains the compensation
setting even after power goes off.
• If using the camera in (Stitch Assist)
mode, you cannot change the
compensation after taking the first shot.
Setting the White Balance
Setting the white balance to match the
dominant light source when shooting will
adjust the coloring of the image (excluding
images) to the correct settings for the
prevailing light conditions.
The camera sets the white
balance automatically.
Use when shooting outdoors
in sunlight on a clear day.
Use when shooting outdoors
under cloudy skies, in shade,
or at dusk.
Use when shooting under
tungsten lighting.
Use when shooting under
fluorescent lighting.
Select this setting if you want
to shoot in black and white.
Auto
Daylight
Cloudy
Tungsten
Fluorescent
Black and
White