Canon A20 - Manual (Page 62)

60
5
Press or button to
select [OK], and then press
the SET button.
• If you decide you don’t want to erase the
image, select [Cancel] instead of [OK].
• To delete additional images, repeat Steps
4 and 5 as necessary.
6
Press the MENU button to
close the erase function.
A faster way to delete an image is to replay it
and then press the
/ button ( p. 11).
(But note that this quick-erase feature is
disabled if the camera is connected to the
optional Card Photo Printer CP-10.)
Erasing All Images
• Remember that erased images cannot be
recovered. Be careful to avoid accidental
erasures.
• This function will not erase protected
images ( p. 58).
1
Turn the mode dial to , and
press the MENU button to
display the menu.
2
Press or button to
select , and then press the
SET button.