Ask Proxima DP2300 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
3. Place your fingers beneath the mirror assembly (located at the
lower center of the front panel) and raise it into place until it
reaches a 45“ angle (approximately) relative to the top of the
lens assembly-
Figure 6
Raising the mirror assembly
Figure 7
The Desktop Projsccor in the open position
Your projected image should fill the projection screen. If you
want to raise or lower the projected im^e, simply adjust the
mirror assembly to the appropriate angle.
2-^ » User's Guide
Advertising