Ask Proxima DP2300 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Chapter S • Detsiied Setup
Closing the Projector
To close the projector, reverse the opening procedures,
1. Rotate the projection mirror assembly forward and down until
it is in the fully dosed position.
2. Rotate the hinged cover assembly forward and down until it is
in the fully closed position.
CAUTIOiy! Gently dose the mirror and hinged cover
assembly. Forcing them to snap into place may damage the mirror
assembly. Close the assemblies in the proper order. Do not
attempt to dose the projector by only moving the cover assembly.
User's Guide
a-7
Advertising