Replacing lamps – Ask Proxima DP2300 User Manual
Page 52
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Chapter -4
Maintenance
Replacing Lamps
Leave the Desktop Projector running with the lamp off prior to
changing lamps. This will allow the fan to run and speed the
cooling of the lamp chamber. Don’t open the lamp chamber until
the projector has cooled.
1. Remove the power cord. As a built-in safety feature, the lamp
chamber cannot be opened unless the cord is removed.
2. Move the lamp chamber latch to the right. The cover panel
will “pop” open.
Figure 26
Opening the lamp chamber latch
•4—4 • User's Guide
Advertising