AEG MICROMAT 625 - Manual (Page 12)

Instaliation/connections
Build-in
model
Pre-cleaning
the oven
12
A gap all around the oven of 5 cm is necessary in order to assure
perfect ventilation.
Connect to a plug socket with protective earth contact and
fused with a 16 A-L automatic device or 16 A slow-biowing
fusel
.50 mm
50 mm
rn
----------------------------------------------
MC 249
To instali the appliance in a hanging kitchen cabinet, use the
appropriate mounting frame.
Note the relevant Instructions for Installation and Connection.
The oven must be connected by means of a proper plug and pro­
tected with a 16-A-L automatic or a 16 amp slow fuse.
When the oven is installed, there must be a possibility of discon­
necting it from the mains with a contact break of at least 3 mm on all
poles.
A suitable size of LS switch, or a melting or fly-out fuse, are suitable
contact-breakers.
Before using my oven for the first time, clean all accessories, turn­
table, turntable support etc., with warm water and washing-up
liquid.