AEG MICROMAT 625 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Pre-selecting
duration/
finish
Seiect the
mode of
operation
Hours/
minutes
Start
Automatic
start
Note
24
First enter whichever mode of operation you wish (as described
above).
Do
not
press the <J>
button
but the
button
instead. The —H symbol will start
to flash in the display to show the
duration/finish time, and the clock will
start to flash “0:00”.
Now enter the time of day at which the
sequence is to finish. Enter the hour with
the +/-
buttons.
Press the ©
button,
and set the minutes with the +/-
but
tons.
Press the <i> button.
The time of day
will appear in the display, and the —H
symbol of pre-selection of duration/
finish time will light up.
The appliance will switch on automati
cally, and off again at the point in time
you determine (in this example at 12; 15).
The symbol for the operating function
selected, e.g. micro-wave, will light up in
the display. The —H symbol for duration/
finish will also light up. The pre-selected time will now count
downwards in seconds.
If the pre-selection is used for microwave solo operation, it
must
be ensured that food is inside the appliance.