Canon FAX-B155 - Manual (Page 30)

18
1
Press [Receive Mode] until “Fax Only Mode”
appears on the LCD.
Fax Only Mode _________________________________
The fax is set up at the factory to Fax/Tel Mode. If you have a dedicated fax line,
you need to set the mode to Fax Only.
■ Setting Fax Only Mode
When you set the fax to Fax Only Mode, the unit picks up every call and automati-
cally treats it as a fax transmission.
The fax cannot receive automatically if you are making copies, printing reports, or
registering information. See p. 72.
2
Press [Start/Copy].
When this mode is set, the LCD will display the
time and “FaxOnly”.
■ Receiving documents in Fax Only Mode
When the fax is set to Fax Only Mode, it automatically receives documents
whenever a call comes over the fax line.
1
Make sure the fax is set to “Fax Only Mode”
(see above).
The fax assumes all incoming calls are from another fax machine sending a
document. It receives the documents automatically.
Receive Mode
Fax Only Mode
Start/Copy
12:00 FaxOnly