Canon FAX-B155 - Manual (Page 71)

59
5
SENDING F
AXES
1
Feed the document face-down into the Auto-
matic Document Feeder (ADF).
See Loading the document, p. 49.
You can set the resolution and density. See p. 51.
2
Press [Function].
Wait a second for TEL REGISTRATION to appear.
3
Press [Send Options].
▼
Press [Start/Copy].
STANDARD
Function
SELECT MENU
TEL REGISTRATION
MEMORY TX
▼
Start/Copy
TEL =
01
Send Options
Sending documents
4
Dial the other party’s fax number.
Use one of the dialling methods described earlier in
this chapter. See p. 56.
5
Press [Start/Copy].
The fax scans the document into memory and begins
sending.
9 0
TEL= 9876543333
Start/Copy
TX/RX NO. XXXX
MEMORY INPUT P01
Memory Sending ________________________________
You can use Memory Sending to send your document. With Memory Sending, the
fax quickly scans the document into memory. Then, after it dials the receiving party,
it sends the document from memory. This means you do not have to wait for the fax
to finish sending before you can retrieve your original document.
You can send up to 21 A4-size pages at a time with Memory Sending (based on the
Canon FAX Standard Chart No.1- standard resolution).
❚ If the memory becomes full while scanning your document, MEMORY FULL is
displayed on the LCD. If this should happen, you may need to open the operation
panel to remove the document. See Clearing document jams, p. 62. Then try
dividing the document into several sections and sending each section individually,
or send using Direct Sending or Manual Sending. See p. 57.
The definition of an A4-size page for memory storage purposes is based on the
Canon FAX Standard Chart No.1.