Canon FAX-B155 - Manual (Page 78)

66
Sequential Broadcasting
Sending a document to more than one location
Sequential Broadcasting sends one document to more than one location.
You can send to a total of 31 locations as follows:
One-touch Speed Dialling = 10 locations
Coded Speed Dialling = 20 locations
Regular dialling (Numeric buttons dialling) = 1 location
You can enter the One-touch Speed Dialling and Coded Speed Dialling locations in
any order. You simply press the One-touch Speed Dialling button, or press [Coded
Dial] followed by the two-digit code (with the numeric buttons).
You can also include one location using Regular dialling. Remember that when
using regular dialling, you must press [Start/Copy] after entering the number.
You can send up to 21 A4-size pages (based on the Canon FAX Standard Chart
No.1-standard resolution).
1
Feed the document face-down into the Auto-
matic Document Feeder (ADF).
See Loading the document, p. 49.
You can set the resolution and density. See p. 51.
2
Dial the other party’s fax number.
❚ You can send to up to 31 locations.
❚ Simply enter the numbers one after the other: press
the desired One-touch Speed Dialling button or
press [Coded Dial] followed by the two-digit code
(with the numeric buttons).
❚ You can enter only one number directly with the
numeric buttons using regular dialling. Remember
to press [Start/Copy] after entering the number.
❚ You can also press [Redial/Pause] to redial the last
number dialled with the numeric buttons.
❚ You must press each button within 10 seconds of
the preceding one. The fax begins the operation
approximately 10 seconds after you press the last
button.
3
Press [Start/Copy].
❚ The fax reads the document into memory and
begins sending. Between transmissions, MULTI
TRANS. ON displays on the LCD.
❚ To cancel a transmission, press [Stop] during
dialling or transmission. All transmissions in the
sequence are cancelled.
STANDARD
9 0
TEL= 34567890
Start/Copy
TX/RX NO. XXXX
MEMORY INPUT P01