Shcing/grating/chipping with the work-discs – AEG FINESSE KM 31 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SHcing/grating/chipping with the work-discs
Disc Side A
for fine grating
Disc side D
make fine slices
Disc side C
for coarse grating
Disc side H
makes thick slices
Disc side G
for fine grating (potatoes)
Disc side E chips potatoes
(special accessory
KM 21. KM 31)
Fitting the woric-discs (fig 4)
• Insert the disc-holder into the work-disc
opening (with the working side facing
upwards) and turn until it locks
•
The required disc side marking must be
legible from above when inserting The discs
are to some extent to be used on both
sides
•
Close lid
•
Possibly cut the prepared food to slightly
smaller size so that it will fit the feed tube
•
Place the inserted food as upright as
possible in the feed tube
•
Always use the plunger to press the food
downwards
•
The thickness of the food to be processed
can be affected by pressure
Potato-chipping disc (special accessory
KM 21> KM 31)
•
Fill potatoes with appliance switched off
Uniformly press down with plunger
•
Switch on appliance (setting 1)
•
Repeat procedure for next fill
23