Talkswitch CT.TS005.001101.UK - Manual (Page 67)

T A L K S W I T C H C O N F I G U R A T I O N 5 9
If 7 is dialed
TalkSwitch uses 7 to precede PBX Extensions of another Centrex or PBX
system. If TalkSwitch is not connected to another system, 7 is inactive. If
TalkSwitch is connected to another PBX system, see section 2.3.5.4 for
more details.
If 80 – 88 or 9 is dialed
If you press ‘80 – 88 or 9’ at the Auto Attendant, you access DISA if it has
been permitted. See section 2.3.6.3 for more details on configuring DISA
and section 3.7.1 for details on using DISA.
Utilities for an auto attendant
Record Instructions (button)
Click this button to display a dialog box showing the instructions on how to
record and playback an Auto Attendant using a telephone. No adjustments are
required for the recording volume. TalkSwitch adjusts the recording volume for
optimal recordings.
Load Auto Attendant (button)
Click this button to display a dialog box with instructions on how to load an
Auto Attendant using a pre-recorded .wav file. If you want to have Auto
Attendants professionally recorded, make sure to specify that the files have to
be 8KHz, 8bit, mono, and saved as a µ-law format .wav file.