Compaq 4000N User Manual

Page 159

Advertising
background image

Technical Reference Guide

Compaq Deskpro 4000N and 4000S Personal Computers

First Edition - September 1997

8-19

Standby - The computer is in a low power state: video is off, some subsystems may be drawing
less power, and the microprocessor is halted except for servicing interrupts. Video graphics
controller is under driver control and/or VSYNC is off and the power supply fan is turned off.
Any of the following activities will generate a wake-up SMI and return the system to On:

a.

Keyboard

b.

Mouse

c.

Serial port

d.

Diskette drive

e.

Hard drive

f.

RTC Alarm

If no APM connection is present, the BIOS will set an APM timer to 45 minutes, at which
time the Suspend will be entered if no activity has occurred. This function can be defeated (so
that Suspend will not be achieved). If an APM connection is present, the BIOS APM timer is
not used and Suspend is entered only by user request either through an icon in Windows 95 or
by pressing and releasing the power button under 4 seconds.

Suspend - The computer is in a low power state: video graphics controller is under driver control
and/or HSYNC and VSYNC are off, some subsystems may be drawing less power, and the
microprocessor is halted except for servicing interrupts. Any of the following activities will
generate a wake-up SMI and return the system to On:

a.

Keyboard

b.

Mouse

c.

Serial port

d.

Diskette drive

e.

Hard drive

f.

RTC Alarm

g.

Network interface controller

The APM BIOS for this system supports APM 1.2 as well as previous versions 1.1 and 1.0. The
APM BIOS functions are listed in Table 8-3.
Table 8–2. APM BIOS Functions (INT15)

Table 8-3.

APM BIOS Functions (INT15)

AX

Function

5300h

APM Installation Check

5301h

APM Connect (Real Mode)

5302h

APM Connect (16-bit Protected Mode)

5303h

APM Connect (32-bit Protected Mode)

5304h

Interface Disconnect

5305h

CPU Idle

5306h

CPU Busy

5307h

Set Power State [1]

5308h

Enable/Disable Power Management

5309h

Restore Power On Defaults

530Ah

Get Power Status

530Bh

Get PM Event

530Ch

Get Power State

530Dh

Enable/Disable Device Power Management

530Eh

APM Driver Version

530Fh

Engage/Disengage Power Management

5380h

OEM (Compaq) Specific APM Function

Advertising
This manual is related to the following products: