Daewoo DTC-20 - Manual (Page 12)

11
INSTALL MENU
(For operating instructions, see page 9,HOW TO USE THE SUB-MENUS)
Automatic Tuning System
If you have a satellite decoder: If your decoder is connected to the TV set by the aerial jack (C3), you must power on the demodulator and
tune Sky News before starting ATSS.
ATSS = Automatic Tuning and Sorting System. To start the ATSS function:
- Select „ATSS” function.
- Adjust to the required country.
- Press and hold the OK button (A18) to start the automatic tuning.
The ATSS function has started when the phrase „Please Wait!” appears (in red characters) in the help instructions box, below the Install
menu.
When the ATSS function is fi nished, the stored programs are displayed on screen using Edit menu presentation (to Exit tuning before
automatic tuning fi nished, press the remote control MENU button (A19))
Program List Edition
This allows you to easily manipulate the existing program order allocation, by using Edit menu functions described below.
To enter the EDIT menu: From Install menu, select „Edit”, and press the OK button
(A18): the EDIT menu appears.
The current program being displayed is highlighted in blue (on the central line). In the
above case, the current program is PR00. The 3 previous, and 3 following programs,
are always displayed. Any program from 00 to 99 can be selected, by using the
remote control CURSOR UP (A6) / DOWN (A21) buttons.
The memorised programs can be modifi ed as follows :
INSTALL INSTALL
ATSS GB
EDIT
SYSTEM GB
CHANNEL C46
FREQUENCY 671,25
NAME ABCDEFG
PROGRAM 09
STORE TO
09
EDIT EDIT
PR NAME CH SKIP
03 BBC1 C23
02 BBC2 C33
00 - - - - S41
99 - - - - S41
98 - - - - S41
97 - - - - S41 Skip code
: Program skipped
Nothing : Program not skipped
Automatic tuning system
Program list edition
TV system modifi cation
Channel number
Channel Frequency
Channel name
Program number
Program storage number
Country
TV system
Channel number
Channel Frequency
Channel name
Program number
Program storage number
Program number
Station name
Channel number