Daewoo DTC-20 - Manual (Page 14)

13
1. When switched to ON:
Prevents the use of the TV set without remote
control
2. Wake up function
This function is only selectable when the clock
is set. The TV set turns on from stand-by at the
WAKE TIME with the programme entered on the
WAKE PROG. line. Put the TV set on stand-by with
the remote control
3. Shared with WAKE TIME.
4. TV clock setting
This function allows user to enter the time
manually.
Note : If you turn off the set with the main power
button, the clock setting is lost. An automatic
attempt is made to set the clock again at power
on.
5. This function is only selectable when the default
picture format is currently active (see also
FORMAT SELECTION, AUTO setting, page 8). This
selects the default format to be used only when
the format selected with the ZOOM button (A15)
is AUTO, and no picture format signalling data is
received.
6. LANGUAGE menu entry.
FEATURES MENU
See section near the end of section DAILY USE for a more detailed explanation of these functions.
(For operating instructions see page 9, HOW TO USE THE SUB-MENUS)
1. Adjust this value ON or OFF.
- In stand-by mode, the stand-by indicator fl ashes
red and green to indicate the CHILD LOCK is set.
- The front panel TV buttons (B7, B8, B9) become
inactive and the TV will only respond to the
remote control.
2. Switch the WAKE UP function OFF or ’ON’ (the
time will be shown e.g. 07:15) with the remote
control CURSOR LEFT (A7) /RIGHT (A20) buttons
- Enter the wake up time with the remote control
0...9 NUMBER (A3) buttons.
3. Adjust TV turn-on program number
4. Adjust TV clock. Clock will start at 0 seconds
upon entry of the 4th fi gure.
The prog. no. which can be used to automatically
seize the time at turn on can be entered here.
5. Choose your preferred default format with the
remote control CURSOR LEFT (A7) /RIGHT (A20)
buttons.
Note : For 4:3 TVs FULL SCREEN is represented
by 4:3. For 16:9 TVs FULL SCREEN is repre-
sented by 16:9.
6. The currently selected LANGUAGE is displayed.
Press the OK button (A18) to access the menu
and change the selection.
LANGUAGE MENU
- Select the preferred LANGUAGE by use of the CURSOR LEFT
(A7), RIGHT (A20) buttons, and the CURSOR UP (A6) or DOWN
(A21) buttons.
- Press the OK button (A18) to confi rm the selection (the choice
will be highlighted in red).
Note : The languages shown are subject to modifi cation without
prior notice.
FEATURES FEATURES
CHILD LOCK OFF
WAKE TIME OFF
WAKE PROG. 04
CLOCK - -:- -
CLOCK PROG 01
ZOOM AUTO 4:3
LANGUAGE GB
LANGUAGE LANGUAGE
BG CZ D DK E
F FIN GB GR H
I N NL P PL
RO RUS S