Daewoo DTC-20 - Manual (Page 9)

8
PICTURE CONTROL
You can select three pictures settings, by using the remote control NORMAL button (A17) :
- Normal I (standard hard picture)
- Normal II (standard soft picture)
- Favourite
For other adjustments: BRIGHTNESS, CONTRAST, COLOUR, SHARPNESS, NOISE REDUCTION, use the PICTURE menu.
If an NTSC signal is received, then the TINT adjustment will also be available.
SLEEP FUNCTION
The set will turn off (to stand-by mode) after a period of time that you can select. By repeated use of the remote control SLEEP
button (A4), you can enter one of the following settings :
OFF 20 min 40 min 60 min 80 min 100 min 120 min OFF
01 BBC1
STEREO
20
Remaining time (minutes)
before TV set switches off
FORMAT SELECTION
AUTO setting :
If picture format signalling data is
received, then the most appropriate
ZOOM format will be automatically
selected. In the absence of this data, the
default ZOOM format will be selected(see
page 13, ZOOM AUTO function under
FEATURES MENU).
Otherwise, the preferred mode of the user
can be forced by repeated pressing of the
remote control ZOOM button (A15):
Television Format 4:3
The following picture formats are
available:
AUTO
14:9 16:9 FULL SCREEN AUTO
Television Format 16:9
The following picture formats are
available:
AUTO
4:3 ZOOM 14:9 ZOOM 16:9
FULL SCREEN PANORAMA AUTO
The SLEEP time remaining (before TV turn-off ) can be seen again at any time by one
touch on the remote control SLEEP button (A4).
A second touch (while the status display is active) will modify the SLEEP time remaining.
01 BBC1
FAVOURITE
18:30
01 BBC1
NORMAL I
18:30
01 BBC1
NORMAL II
18:30