Button) to select a station, 2 press the ii button to store the station, Preset number tuning – Aiwa XR-M70 User Manual
Page 10: 1 press thetuner/band button to select a band, Another method to tune in to a preset station, To clear a preset station, 3 repeat steps 1 and 2, Note, Presetting stations
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PRESETTING STATIONS
The unit can store a total of 32 preset stations. When a station
is stored, a preset number is assigned to the station. Use the
preset number to tune in to a preset station directiy.
1 Press theTUNER/BAND button to select a band.
Then, press the or ►>! button (or the ◄◄ /
button) to select a station.
2 Press the II button to store the station.
A station is assigned a preset number, beginning from 1 in
consecutive order for each band.
Preset number
PRESET NUMBER TUNING
1 Press theTUNER/BAND button to select a band.
2 Press the numbered buttons on the remote
control to select a preset number.
Exampie:
To seiect preset number 15, press the +10 and 5 buttons.
To seiect preset number 10, press the +10 and 0 buttons.
Another method to tune in to a preset station
Press the TUNER/BAND button to seiect a band.
Then press the ► button.
Each time the button is pressed, the station with the next higher
number is seiected.
To clear a preset station
Seiect the preset number of the station to be cleared. Then, press
the ■ button, and press the II button within 4 seconds.
The preset numbers of ali other stations in the band with higher
numbers are aiso decreased by one.
L l<'l
I I I
\ ) I n U i A
J U lU ILI MH.
Frequency
3 Repeat steps 1 and 2.
NOTE
Each band can oniy store a maximum of 16 preset stations.
1
0
ENGLISH