To change the display in playback mode, About cassette tapes – Aiwa XR-M88 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DISPLAY
SHIFT
To change the display in playback mode
Press the DISPLAY button while pressing the SHIFT button on
the remote control.
Each press on the button changes the display in the following
order:
[->© Level indicator
'—@ Tape counter
(Example: TAPE 0185)
About cassette tapes
• To prevent accidental erasure, break off the plastic tabs on
the cassette tape after recording with a screwdriver or other
pointed tool.
Side A
To record on the tape again, cover the tab openings with
adhesive tape, etc. (On Type II tapes, take care not to cover
the Type II tape detection slot.)
• 120-minute or longer tapes
are extremely thin and easily
deformed or damaged. They are not recommended.
• Take up any slack
in the tape with a pencil or similar tool
before use. Slack tape may breaker jam in the mechanism.
1
4
ENGLISH