Filling the rinse aid dispenser, Refill indicator for rinse aid – AEG OKO_FAVORIT 3220 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Filling the Rinse Aid Dispenser

Rinse aid is designed to ensure that the tins water runs off the dishes and

glasses leaving them free of water marks and sparkling,

The rinse aid is automatically dispensed during the wash programme.

IMPORTANT! Only use rinse aid designed for use in domestic dishwashers.

Other rinsing agents such as vinegar with a acid content greater than 5% could
damage the dishwasher and in any case do not give the right results.

The accidental filling of the rinse aid compartment with detergent will damage
the appliance.

The rinse aid dispenser is located on the inside of the door.

□ Open door

□ To fill the dispenser, turn the locking lid of the rinse aid dispenser a quarter to

a turn anti-clockwise and open.

□ Pour in rinse aid: maximum to the indicated line, Maximum amount, approx,

150 ml.

Fig . 7

KLE-1 (1)

Fig. 8

KL£2(2}

□ Replace locking lid and tighten in a clockwise direction.

Cl Wipe away any excess rinse aid with a doth, otherwise too much foam will

build up during the wash.

Refill Indicator for Rinse Aid

You should refill the rinse aid dispenser when a dark dot surrounded by a bright

circle ©appears in the window of the rinse aid dispenser (Fig. 8/arrow).

When it is full, the window is completely dark.

18

Advertising
This manual is related to the following products: