Setting the rinse aid dispenser – AEG OKO_FAVORIT 3220 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
\-\i
r:.
■ ■ ■■ ■
' s ' * * « t 4
' ■ '
I t ‘ '
: r , ; : : b . ' ' ■ t *
Setting the Rinse Aid Dispenser
The adjuster to alter the quantity of rinse aid being dispensed is located in the
opening of the dispenser. The quantity can beset from 1 t o 6 ( 1 - 6 c m ^ ) .
The dosage is pre-set to 4, At this setting the full dispenser will hold sufficient rinse
aid for 40 wash cycles. Do not alter this setting unless an unsatisfactory rinse
result makes it necessary (see “Troubleshooting”).
□ To adjust the dispenser, turn the locking iid of the rinse aid dispenser a quarter
of a turn anti-clockwise and open, (Fig. 9)
□ Turn the adjuster to the desired setting using a screwdriver
Fig. 9
KLD 1 (2)
□ Replace the locking lid and tighten in a clockwise direction.
□ Wipe away any excess rinse aid with a cloth, otherwise too much foam
will build up during the wash.
19