AEG OKO_FAVORIT 3220 - Manual (Page 25)

& <3
........... r ■ ' í ■ ■ " w . í ‘ • t ' i * i • • ' í V , , ' * * . . / » ■ . ■ , • . ■ ■ ' 1 » ' . ■
Setting the wash programme:
□ Check that the crockery and cutlery in your dishwasher are arranged so that
the spray arm is not obstructed.
□ Close the door
□ Open the water tap fully, if closed
Important! If a wash programme has started, though the water tap is closed,
switch off the machine. Open the water tap and re-set the wash programme.
Setting the Programme;
O Turn the programme indicator clockwise, according to the Programme Guide,
to A, B o r C ,
□ Turn the programme selector to the desired programme {See "Programme
Guide"). The programme starts. During the wash programme, the programme
indicator moves step by step, showing the stage which the programme has
reached. During the heating up of the main wash and rinse, the programme
indicator remains stationary, until the required temperature is reached,
Programme Correction;
□ Correct a wrongly selected programme by first switching off the machine with
the programme selector (setting 0).
□ If the programme is already in the washing stage, ensure that there is still deter­
gent in the dispenser.
□ Set the desired wash programme once more.
Interrupting the Programme:
□ Awash programme in progress is interrupted when you open the door.
□ Close the door. The wash programme will start again from the point at which it
was interrupted.
□ Only open the door during the wash cycle when absolutely necessary. By open­
ing and closing the door cold air enters the dishwasher and quickly heats, and
expands. This can cause irregular operation and. may require a service call.
25