AEG MICROMAT 125 - Manual (Page 13)

As soon as you plug my plug into the socket, my display flash­
es.
1. Press button +/- for setting the hours. Press button © and
set the minutes using the -•■/- buttons. Then press button ©
again. The appliance is ready to operate!
2. By pressing button © twice you can delete the time of day
set and enter a new one (as described above under step
1.).
3. Press button ©. Hold the +/- button down until the time you
wish to set on the timer appears in the display (maximum set­
ting 99 minutes).
4. Press button and P 9 appears in the display. If you press
the - button, P 0 will appear in the display. The short time
symbol 0 starts to flash.
5. Press start button The time you have set appears in the
display, counting down in seconds.
6. When the timer has finished running it gives an acoustic sig­
nal, which you can switch off by pressing button C ■ The time
of day appears in the display.
7. In general, after wrong entries the letter E appears in the dis­
play. Correction by pressing button C ■ Then you can enter
new settings.
Set time
of day
Hours/
Minutes
Correcting
time of day
Timer
Starting
the timer
What you
shouid
also know
13