AEG MICROMAT 125 - Manual (Page 32)

Installation/connections
Installation/
connections
32
To ensure trouble-free ventilation, an air space of 5 cm around the
appliance is necessary.
Connect to a plug socket with protective earth contact and
fused with a 10 A-L automatic device or 10 A slow-blowing
fuse!
. 50mm
50 mm
LJ
---------------------------------------- ^
MO 249
Installing built-in models 125/135 E
To install one of the MICROMAT models 125/135 E in a kitchen ca­
binet, use the appropriate mounting frame.
Caution! When installing the MICROMAT model 125 behind a
roller door, the door must always be open when the oven is in
use.
If the door is closed the oven will be damaged and guarantee
cover will not apply.
The oven must be connected by means of a proper Home Office
socket and plug, protected with a 10-A-L safety cut-out ora 10 amp
slow fuse.
When the oven is installed, there must be a possibility of discon­
necting it from the mains with a contact break of at least 3 mm on all
poles.
A suitable size of switch, a safety cut-out or a melting or fly-out fuse,
are suitable contact-breakers.