AEG MICROMAT 125 - Manual (Page 21)

With the buttons 1, 2 and 3 you can enter and store three
programmes you invent for yourseif (time/power).
This means you can store programmes which are needed partic­
ularly often in your household, e. g. warming up a mug of milk,
1 minute at P 9.
1. Press button 0, set the required cooking time with +/- but­
tons.
2. Press button The highest power setting P 9 appears in the
display. You can change this setting with the +/- buttons.
The micro-wave operation light flashes.
3. Press one of the buttons 1,2 or 3 in order to save a cooking
programme. The number of the programme appears In the
display.
4. Press button C as well, in order to save your pro­
gramme. The time of day appears in the display.
5. Press one of the buttons 1, 2 or 3 first the cooking time
will appear in the display, e. g. 8:00, then the power setting
you have selected, e. g. P 5, the microwave operation
light flashes and the programme store light comes
on.
6
.
Press start button <^. The micro-wave operation light
comes on and the cooking time appears in the display,
counting down.
The interior lighting is on. At the end of the cycle you will
hear the acoustic signal.
The time of day appears again in the display.
7. Caution: When storing a new time and power setting in
one of the programme storage features, the former
data are cancelled!
General points
on storing
your own
cooking
programmes
Entering
your own
cooking
programmes
Saving your
own cooking
programme
What you
should
also know:
Calling up
your own
cooking
programme
What you
shouid
aiso know:
Note:
21