Compex WP54AG - Manual (Page 130)

119
S S t t e e p p 5 5 : :
You can enter the parameters according to the recommended values in the
pop-up window, click on the
A A p p p p l l y y button to update the changes.
This table describes the parameters that can be modified in the Long Distance
Parameters
page.
Parameters Description
Outdoor The Outdoor parameter is disabled by default. If set to
Enable, the Outdoor parameters will be configured for
outdoor communication over short or long distances as
specified.
Distance This parameter determines the distance between your
access point and the remote access point. It should be
entered in meters.
Slot Time Time is slotted and each unit of time is called one slot
time.
ACK Timeout This parameter determines the timeout allowed for the
sending client to receive the acknowledgment response
from the receiving client. If no acknowledgment packet
is received within this period, the sender will assume the
receiver has not received the packet and will attempt to
re-send.
CTS Timeout This Clear-to-Send time is the time the wireless sender will
wait for a CTS packet signaling that the channel is idle
and it can start data transmission. If no CTS packet is
received within this period, the sender will assume the
channel is busy and will wait before trying to send again.