Compex WP54AG - Manual (Page 26)

15
S S t t e e p p 3 3 : :
Next, connect the RJ45 Ethernet cable attached to the PoE Injector to your
PC’s Ethernet network adapter.
Once you have finished configuring your access point, you can connect the
PoE Injector’s RJ45 Ethernet cable to your network device, such as to a switch
or hub.
S S t t e e p p 4 4 : :
Connect the power adapter supplied in the PoE kit to the main electrical
supply and the power plug into the socket of the injector.
Note:
The voltage and current supplied to the power adapter and the PoE kit power
adapter are different. Do not interchange the power adapters.