Compex WP54AG - Manual (Page 24)

13
S S t t e e p p 2 2 : :
Insert one end of the Ethernet cable to any of the Ethernet ports on your
access point, and the other end of the cable to your PC’s Ethernet network
adapter.
S S t t e e p p 3 3 : :
Attach the power adapter to the main electrical supply, and connect the
power plug into the socket of the access point.
S S t t e e p p 4 4 : :
Turn ON the power supply and power ON your PC. Notice that the LEDs: Power
and Port 1 or 2 (depending on which port you have connected the RJ45
Ethernet cable to) have lighted up. This indicates that connection has been
established successfully between your access point and your PC.
PC